門膠條老化、變形、發硬，導致密封不緊，冷氣流失、耗電增加、內部結霜。
我們提供專業更換原廠門膠邊服務，密封效果恢復如新，節能耐用。

The door gasket is aged, deformed, causing air leakage, high power consumption and frost buildup.
We provide professional replacement service, restore perfect sealing performance.

溫度降不下來、酒溫長期偏高，多為雪種不足、冷凝器積塵、壓縮機老化。
Not cooling, high temperature, mostly caused by insufficient refrigerant, dusty condenser, aging compressor.

插電不開機、屏幕黑屏、無風扇聲，常見電源板故障、保險絲燒毀、線路接觸不良。
No power, black screen, no fan noise, usually caused by power board failure, blown fuse, poor wiring.

忽冷忽熱、無法恆溫，多是溫控器、感溫探頭損壞，主板數據失準。
Unstable temperature, mostly due to damaged thermostat, temperature sensor, main board error.

運行轟鳴、嗡嗡聲、雜音大，風扇軸承磨損、壓縮機懸膠老化、配件鬆動。
Loud noise during operation, caused by fan bearing wear, compressor suspension aging, loose parts.

底部漏水、內層滴水，排水孔堵塞、化霜系統故障、門封漏氣結霜融化。
Water leakage at bottom, caused by blocked drain, defrost system failure, door seal leak.

內壁結霜結冰無法正常使用，自動除霜模組故障、門封老化漏冷氣。
Heavy frost on inner wall, caused by defrost module failure, aged door seal.

照明不著、時亮時滅，燈泡損壞、燈帶線路接觸不良、開關故障。
Interior light failure, caused by damaged bulb, poor wiring, switch fault.

調溫按唔到、面板卡死，觸控板受潮、主板按鍵模組損壞。
Unresponsive control panel, caused by moisture damage, main board module failure.

24小時運轉、耗電嚴重，溫控探頭失效、主板故障、製冷系統異常。
24-hour running, high power consumption, caused by sensor failure, main board error.